- Adjustable flow submersible pumps for self-contained fountains
- Energy efficient pumps boast reliable magnetic drive technology
- Versatile pumps great for small, medium or large water fountains
Enjoy reliable pump performance with minimal operating cost. TetraPond Statuary Pumps feature an extremely energy efficient design for low energy consumption while delivering reliable flow rates. Submersible-use only magnetic drive statuary pumps each feature flow control so you can easily adjust flow rates to suit your specific application. Thermal cut-off feature temporarily switches off pumps in the event of overheating - automatically restarts after pumps cooled down.
TetraPond Statuary Pump 75 (mfg# 19710) is recommended to power small fountains and tabletop fountains.
TetraPond Statuary Pump 330 (mfg# 19712) and 425 (mfg# 19713) are recommended to power medium and large fountains.
|2-1/4" x 1-1/2" x 1-7/8" high||75||2.9 ft||1/4", 3/8", & 1/2"||5.2|
|1-3/4" x 2-1/2" x 2-1/2" high||140||3 ft||1/4", 3/8" or 1/2"||13|
|4-1/2" x 3" x 3-1/2" high||330||6.5 ft||1/4", 3/8", & 1/2"||17|
|4-3/4" x 3" x 4" high||425||6.5 ft||1/2", & 3/4"||20|
The Tetra statuary pumps are suitable for use in powering self-contained fountains statuary and small container ponds.
Installing Your Tetra Statuary Pump
Adjusting Water Flow
All SP series pumps have an intake flow adjuster on the front, which can be turned to regulate water to the pump.
Maintenance & Care
Before carrying out any maintenance, the unit must be disconnected from the electrical circuit. Warning: Failure to carry out routine maintenance or leaving the pump under reduced or no-flow conditions for long periods (i.e. blocked filter) will result in accelerated wear.
Do not lift the pump by the electrical cable as this may cause irreparable damage to the electrical cable, which cannot be replaced if damaged. Instead, lift the pump by the housing.
After use, there may be a noticeable flow decrease in your water feature. This is often due to algae and other debris building up within the water tubing, water feature tubing, or inside the pump housing.
Cleaning the Tubing
Cleaning the Pump
To Reinstall Impeller
The Tetra Statuary Pump in the Winter
If there is a danger of the water freezing, the pump should be removed from the water, cleaned with water, and stored in a frost-free location for the duration of the winter.